One For All URC-8910 Manual de usuario descargar pdf (Pagina 20)

Programming Volume Unlock

1. On the URC-8910 remote control, press and hold

SET until you see the display change from the

current device and time to [CODE SET].

2. (x 5) Press the

▼ key five times until you see the display

change to [VOL UNLOCK].

NOTE: If you go past [VOL UNLOCK],press the

▲

key one or

more times to return to it.

3. Press SELECT once to begin programming.You will

see the display change to [ALL MODE].

To unlock one mode, skip to step 4.Otherwise press

SELECT once to unlock all modes.You will see the

display change to [UNLOCKED] and then [EXIT SETUP]

as the remote control automatically exits the pro-

gramming mode and returns to normal operation.

4. or (Optional) Press ▲ (or ▼) once.You will see the

display change to [ONE MODE].

a. Press SELECT once.You will see the display change

to [SEL MODE].

b. Press a mode key once (e.g., TV) to unlock it.

You will see the display change to [UNLOCKED]

and return to [SEL MODE].

c. If desired,repeat step 4b as needed to unlock

volume controls for other devices. Otherwise,

press EXIT to exit the programming mode.You

will see an [EXIT SETUP] message as the remote

control returns to normal operation.

Producer 2002 IR Mnl 4/4/02 10:01 AM Page 33

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 76 77

Sin comentarios

One For All URC-8910 Manual de usuario Pagina 20